5 important guidelines for AC installation

5-guidelines-01-central-air-coditioners-Canada-energy-solution-air-conditioner-furnace-water-heater-attic-insulation-installation-repair-toronto-gta

There are many steps to pay attention to when installing air conditioners, and each step has corresponding precautions. There is a saying that buying air conditioners is not as expensive as installing them. So, what are the precautions for air-conditioning installation? What are the air-conditioning installation steps? Let’s take a look.
1. Precautions for an air-conditioning installation
Air conditioner installation precautions 1.
Prevent Freon leakage: The refrigeration effect of the air conditioner after installation is greatly affected by the amount of fluorine. After the air conditioner is installed, the installer must carefully check the air conditioner connection port to see if there is any Freon leakage;
Air conditioning installation precautions 2.
Prevent rainwater from ingressing: In order to prevent rainwater from pouring into the room, the inside side of the air conditioner‘s wall hole should be higher than the outside side. After installation, the gap of the wall hole must be blocked with putty;
Air-conditioning installation precautions 3.
Prevent indoor water leakage: Condensate water will be generated when the air-conditioner is refrigerated. Theoretically speaking, the condensate water should be directly drained outdoors, but sometimes the condensate water cannot be drained out if it is not properly installed. Therefore, when installing, you can pour some water into the drain pan of the air conditioner to test the drainage;
Air conditioning installation precautions 4.
Prevent outdoor water leakage: The air conditioner will defrost into the water when heating. In order to prevent outdoor water leakage, the installer should install a water outlet and a water outlet for the outdoor unit.

2. Air conditioning installation steps
Air-conditioning installation step 1:
First, the merchant will deliver the air-conditioning to your home (air-conditioning delivery and air-conditioning installers do not belong to the same system, and generally do not arrive at the same time), and then the air-conditioning installer will come and install it for you.
Air-conditioning installation steps Step 2: After the air-conditioning and air-conditioning installers have arrived at your home, the first thing the air-conditioning installers need to do is to help you check whether the appearance of the air-conditioning is consistent. At this time, the air-conditioning installer is responsible for suggesting some problems with the air-conditioning for you. After inspecting the appearance, you need to power-on test the internal machine to see if it can operate normally. If it can operate normally, the air-conditioning installer will proceed to the next step. Generally, the air-conditioning installer will operate in accordance with the air-conditioning installation specifications, but we ourselves You should also check what you can see with the naked eye.

Air-conditioning installation step 2:
Then we need to confirm the installation position of the air conditioner internal unit, and then make the level, lay the air conditioner internal unit mounting frame, the air conditioner installation height is generally above 2.0m, and determine the outlet of the electric wire and water pipe (generally every A room will have an exit. If not, you need to use an electric drill to open it. Generally, air-conditioning installers will bring an electric drill by themselves, but if you want to make a professional hole, you need to ask a professional person to do it), and then we need it Bundle the wires and water pipes together with raw material tape, and then you need to install the internal machine on the internal machine mounting rack made before.

Air-conditioning installation step 3:
At this step, the installer will usually first complete the outer frame for installing the air-conditioning. If it is a newly built community, there is usually a shelf for the air-conditioning, but if it is an old community, the air-conditioning installation is required. The worker installs an air-conditioning installation frame outside, which needs to be operated outdoors, which is dangerous. If the floor is higher than the third floor, you must wear a seat belt.

Air-conditioning installation step 4:
After the internal unit is installed, the air-conditioning installer will install the external unit outdoors and fix it. Then complete the connections between the wires and copper pipes from the internal machine. If the wires and copper pipes are not long enough, the wiring should be done in advance.
Air-conditioning installation steps Step

Air-conditioning installation step 5:
After the internal and external units are installed, a test is needed. After turning it on for a period of time to check whether it is operating normally, and use detergent to smear a little bit on the copper pipe interface of the external unit of the air conditioner, see See if there are bubbles. If bubbles are generated, there is a problem with the interface and needs to be processed again.

The above are the precautions for air conditioning installation introduced by Canada Energy Solution. I hope the guidelines can help you install the AC properly.

Our Community Contributions